Norgren 2113-1 Fuel Tank Vent

Description

Hello, and Welcome to Red's Truck Center.
This is a Brand New, Unpackaged,
Norgren 2113-1 Fuel Tank Vent
This vent is Brand New, and ready for install. It measures approx 2 Inches from top to the bottom, has a .82 inch measurement from the top to the start of the threads, a 1 Inch measurement from the intake to the threads. It has a 1 Inch HEX head at the top.
2113-1 1/2-14 PTF 1.0" 255 ± 25°F 5-10 PSIG 5/16" ID Diesel 30 SCFH @ 2" water pressure
Performance
Application Vents are intended to provide tank breathing, prevent fuel spillage, relieve excess pressure, and
provide thermal venting in vehicle fuel tanks for which this valve is appropriate. Not all vents listed
have pressure and thermal relief functions, view tank vent cross reference to determine function
of each vent.
Limitations Tank vent valves appropriately selected can be used on diesel fuel aluminum tanks up to 200 gallon
total capacity and diesel fuel steel tanks up to 132 gallon capacity.
Material Zamak 3 or brass
Air Venting Typically designed to vent air at 30 SCFH with a tank pressure not more than six inches of H2O.
Unseating Varies with vent model; see tank vent cross-reference for detailed information.
Anti-Spill Vent will not leak in excess of 0.5 ounces per minute of diesel with the vent in any orientation and diesel
applied at any pressure up to 4 PSIG.
Pressure Relief In vents that include pressure relief, the vent will start to flow with diesel pressure applied between 5
and 10 PSIG, and will flow 1.0 GPM or more of diesel at 10 PSIG.
Thermal Relief In vents that include thermal reliefs, the vent will thermally activate and open to atmosphere when
exposed to an enveloping flame in accordance with FHWA Title 49, CFR Part 393 Section 67 (d)(1) that
causes a fuel temperature to rise rate of at least 6° F per minute.
Weight 64.4 grams (approximate, differs with model)
Questions, just ask. This will ship USPS, and has Free Shipping.